PU FOAMS

PU FOAMS

Polyurethane is one of the most versatile insulating materials that we know. Polyurethane foam or PU foam has many applications such as gap filling, thermal insulation, sound insulation, bonding and passive fire protection.

Nowadays we cannot imagine the building sector without this insulating material. Polyurethane foam is available in several variations, including canisters with one or two-component foam. Additionally, the foam can be applied by hand (adaptor) or with a gun. Depending on the type, the foam will expand up to 30 times its original volume after application and cures under the influence of the moisture in the air.

The Den Braven Group is an official FEICA member. As a FEICA member Den Braven as a manufacturer of OCF (One Component Foam) is obligated to test the products in accordance with the test procedures of the FEICA. These standard test methods guarantee consistency and comparability for the market. FEICA has developed 19 standard test methods (TM’s) to which the FEICA members must test and communicate the performances in the technical datasheets.

Manufacturers declaration of intent : http://www.feica.com/our-industry/pu-foam-technology-ocf/ocf-declaration-of-intent

See and read all 19 standard test methods : http://www.feica.com/our-industry/pu-foam-technology-ocf

Gap Filling

Polyurethane foam can be used very well to fill cracks and cavities in building structures and spaces between walls, frames and doors. For these applications Den Braven supplies standard and premium foams, such as High Yield (Maxi-Foam), or traditional foams with user-friendly application guns.

Sound Insulation

By using polyurethane foams in joint work a massive sound reduction can be achieved. Polyurethane foam is known to be very good at blocking out mid-range frequencies (like conversation and loud music). The majority of our polyurethane foams do have a “joint sound insulation” report to underpin their sound reduction performances.

Bonding

The Den Braven Group manufactures a range of unique one and two-component high-end foams based on polyurethane for the bonding of various materials. The environment, time-saving, clean application, low-cost and simplicity are key aspects that form the basis for the development of these products.

Fireproofing

We supply high-end quality foams for linear joints in fire compartments, positioned both horizontally and vertically. These foams can also be used as an insulating barrier to make the surface penetrations fire-resistant and to prevent the passage of smoke, heat and fire. This improves the fire-resistance of buildings, allowing people to be evacuated to a ‘safe’ environment and gives the emergency services time to perform their work. Our fireproofing polyurethane foams are tested and approved according to the directives of the EN 1366 part 4 for linear joints.